Civil Engineering Assignment Sample

Sample 1

Q1:

Answer :

Q.1 Ans. Roof Truss Construction

Step 1 – Follow the construction drawing and specification.

Step 2 – Choose strong timber or steel that meets the required standards.

Step 3 – Cut the truss members to the correct lengths.

Step 4 – Lay out the truss components in the correct position on a flat surface.

Step 5 – Use nail or bolts to join the truss pieces together securely.

Step 6 – Make sure the truss is straight and properly aligned before securing it fully.

Step 7 – Verify measurements and fastenings.

Step 8 – Store trusses carefully to prevent damage before moving them to the site.

Roof Truss Erection

Step 1 – Make sure scaffolding and safety measures are in place.

Step 2 – Mark where each truss should be placed.

Step 3 – Use lifting to position the trusses on the building frame.

Step 4 – Attach the first truss to the frame using strong bolts.

Step 5 – Support the trusses with temporary braces to keep them stable.

Step 6 – Set each truss at the correct spacing and secure it properly.

Step 7– Add bracing to strengthen the structure.

Step 8 – Check to make sure the trusses are safe and secure.

Sample 2

Answer :

Four different types of roof trusses are as follows:

King Post Truss – It is a simple truss which is used for small roofs and it has only one vertical post in middle.
Queen Post Truss – Similar to the king post but has two vertical posts for extra support.
Fink Truss – A strong truss with a W-shape, commonly used for houses.
Scissor Truss – Has sloped bottom parts, making the ceiling higher inside the building.