Still Thinking Of Assignment Help & Grades ? Book Your Assignment At The Lowest Price Now & Secure Higher Grades! CALL US +91-9872003804
Order Now
Value Assignment Help

Sample Solution for AURTTB101 - Inspect and service braking systems

1.  How should waste hydraulic fluid be stored and disposed?

2.  True or False

3.   Complete the following statement about brake pad inspection using the following words.

  1. 1
  2. 2

Mechanical Engineering Assignment Sample

Q1:

Answer :

Storage:

  • Store waste hydraulic fluid in a labeled, sealed, and leak-proof container.
  • Keep the container in a designated, well-ventilated area away from heat, flames, or incompatible substances.

Disposal:

  • Dispose of the fluid through a licensed waste disposal service or recycling facility that handles hazardous materials.
  • Never pour hydraulic fluid down drains, onto the ground, or into regular trash.

Q1:

Answer :
  1. Power assisted brakes are designed with vacuum-assisted units that use engine vacuum?

☒ True

or

☐ False

Q1:

Answer :

Disc brake __ pads__ should be checked periodically. Some __ calipers__ have inspection holes in the caliper body. If they do not, the pads can be _______ from the outer ends of the calliper. If you are not sure the pads are worn enough to warrant _________, measure them at the ________part of the pad. Compare this measurement to the ________brake pad lining thickness listed in the service ________, and replace the pads if needed. Typically, if the ________material remaining on the backing ________is less than 1/8 inch (3.175 mm), the pads should be replaced.